STEP 1. Lift and remove the actual toilet seat by removing the screws that holds it.		STEP 5.  Flush the toilet.		STEP 9.  Use the enclosed white transparent hose and introduce one end of it in the push-in valve. Make sure to twist the hose about 30 degree while pushing in it. This technique will avoid water leaking.
	STEP 2. Place the bidet on the toilet seat rim, make sure to align the holes that are underneath the LEBIDET with the holes on the toilet it self.Place the bidet in an open position to align the "spray head" with the center of the toilet bowl.		STEP 6.  Disconnect the hose that is presently connected underneath the toilet tank.		STEP 10. Repeat the same step with the other end of the hose but this time the other end will be inserted at the LEBIDET valve (water mixed) blue color.
	STEP 3. With the "LEBIDET" seat placed in the correct position over the toilet seat in its original position, and tighten using the plastic screws (provided), make sure that everything its in position before finally tightening the nuts to the plastic screws. (DO NOT OVER TIGHTEN)		STEP 7. Connect the (T) 7/8 fitting to the tank.
	STEP 4.  Shut off the toliet water supply valve.		STEP 8. Reconnect the hose (removed in STEP 6.), to the (T).